LOGIN

MDF-964

Vehicle Tracking Device

MDF-964

MDF-964

MDF-964

Special and smart tracker with wide power supply range and high capacity internal Li-ion battery

MDF-964 features

Product Details

Product Overview

Max GPS MDF-964 is SPECIAL and smart tracker with Bluetooth connectivity, internal high gain GNSS and GSM antennas and integrated high capacity backup battery. Device is designed to work longer without power supply. MDF-964 with Li-ion battery can work up to 10 days in power saving mode. MDF-964 is perfectly suitable for insurance telematics, delivery, trailers tracking, security & emergency services applications. Supported wide range of power supply (6-30V) makes MDF-964 suitable for motorbikes, light vehicles, trucks, buses.

New generation GSM/GNSS module

New GNSS module

With new integrated GSM/GNSS module, your tracking experience will be better than ever before. Even higher sensitivity, faster than ever cold start and almost instant hot start ensures that your fleet will be tracked precisely.

Bluetooth®

Bluetooth

Integrated Bluetooth® enables wireless headset and various other Bluetooth® devices connectivity. Make phone calls to your employee via Bluetooth® headset. No unauthorized calls anymore! Be sure that your employee is always safe and uses hands free headset instead of phone!

Integrated battery

battery

High capacity internal Li-ion battery ensures long autonomous working hours, receive tracking data and warnings when main power source is disconnected.

Smart Crash detection

Smart Crash detection

Ensure safety of your employee with smart Crash detection. Get alarm message immediately after accident, save workers life!

IP54 case

IP54 case

MDF-964 features new case design which ensures increased protection against dust ingress and water splash from any direction. It is certified according IP54 protection class. MDF-964 with IP54 case can be installed in machines with increased posibility of dust and water ingress.

MDF-964 scheme

Product Features

TECHNOLOGY

  • GNSS : Global positiong system/Global Navigation Satellite System.
  • GPRS : General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS : Short Message Service (SMS) is a text messaging service component.
  • Bluetooth : Bluetooth is a wireless technology standard for exchanging data over short distances.

HARDWARE

  • IP54 : Limited protection against dust ingress.
  • Internal GSM antenna : An antenna used for GSM connectivity. Integrated into MDF device PCB. Does not have external connector.
  • Internal GNSS antenna : An antenna used for GPS connectivity. Integrated into MDF device PCB. Does not have external connector.
  • DIN - digital input - 1 : Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input - 1: An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT - 1 : Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • Accelerometer : Accelerometer allows the device to indicate if vehicle is moving or not, as well as measure acceleration.
  • Battery - 1800mAh Li-ion 3,7V Allows device to work without external power source
  • Micro SD : Micro SD card slot for records storing when there is no GPRS connectivity.
  • 6 - 30V : External voltage range.
  • Overvoltage protection : Protects device from voltage jumps till 90V.
  • 1x SIM Card Allows to put 1 SIM card for internet connection
  • USB 2.0 Interface : Device accessible and configurable via USB.

FIRMWARE

  • NITZ time synch. : Network Identity and Time Zone (NITZ) is a mechanism for provisioning local time and date, time zone and DST offset, as well as network provider identity information, to mobile devices via a wireless network.
  • Configuration over Bluetooth : Configuration over Bluetooth gives ability to configure the device remotely by using Bluetooth connection.
  • Bluetooth sensors support : Bluetooth sensors are responsible to transmit the collected data remotely to device.
  • Ignition detection : A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence : A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep : Working modes which let MDF deviceto reduce power consumption and save vehicle battery.
    - In sleep mode, MDF device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, MDF devicesets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection: This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA : Firmware over the air solution. The software is used to send firmware/configuration to MDF devicevia GPRS network.
  • Remote Log : This type of MDF data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • GPRS commands : It is possible to send commands to MDF deviceusing GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • Eco driving : This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
  • Green driving : Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Fuel monitoring LLS : Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.
  • Jamming detection: Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch.: Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • SMS event : SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection: The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Crash detection: Crash detection functionality is generating the record when device detects car accident using the internal sensors (Accelerometer).
  • Odometer : Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection : Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Towing detection : Towing detection feature helps to inform the User about car deporting. The quick event will be sent to server while towing is detected.
  • Integrated scenarios : The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS : The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking : Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing : Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.
  • Voice call: The voice call functionality gives an ability to make a directly phone call with device.

Technical Details

GSM/GPRS features:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS Multi-Slot Class 12 (up to 240 kbps)
  • GPRS Mobile Station Class B
  • SMS (text/data)

Bluetooth:

  • Bluetooth® specification V3.0
  • Bluetooth® transceiver fully compliant with Bluetooth® specification V3.0 for external peripherals:
    • Voice calls over Bluetooth®
    • Configuration via Bluetooth®
    • OBDII Bluetooth® dongle

GNSS:

  • Tracking: 33/ 99 acquisition channels
  • -165 dBM sensitivity
  • Hot start < 1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
  • Accuracy < 3m

Interface:

  • 1 Digital Input
  • 1 Analog Input
  • 1 Digital Open-collector Output (connecting external relays, LED, buzzers etc.)
  • Bluetooth< specification V3.0
  • Built in accelerometer
  • Power supply (+6...+30) V DC with overvoltage protection
  • IP54 case
  • Internal high gain GSM antenna
  • Internal high gain GNSS antenna
  • Integrated 1800 mAh Li-ion back-up battery
  • Dimensions: L(79mm)xW(43mm)xH(27,5mm)
  • 2 Status LEDs
  • Micro USB Port

For product enquiry and more details

CONTACT US

we will try to contact you as soon as possible

Quick Links

Services

Get In Touch

  • PO Box. 11394, Jawad Center
  • King Fahd Road, Al Nuzhah
  • Jeddah-21453, Saudi Arabia
  • Tel: +966 92 001 5111
  • Email:

© 2022-23 - Max GPS Track. All Rights Reserved