MDF-125

Vehicle Tracking Device

MDF-125

MDF-125

MDF-125

GNSS/GSM/Bluetooth tracker with external GNSS, internal GSM antennas, RS232, RS485 interfaces and internal battery

MDF-125 features

Product Details

Product Overview

MDF-125 small and professional tracker with internal high gain GSM and external GNSS antennas, which is able to collect device coordinates and other useful data and transfer them via GSM network to server. This device is perfectly suitable for applications where location acquirement of remote objects is needed: fleet management, car rental companies, taxi companies, public transport, logistics companies, personal cars and so on. MDF-125 can perform tasks on remote objects, such as monitoring engine status, controlling truck's door etc.

New generation GSM/GNSS module

New GNSS module

With new integrated GSM/GNSS module, your tracking experience will be better than ever before. Even higher sensitivity, faster than ever cold start and almost instant hot start ensures that your fleet will be tracked precisely.

Dual SIM

Dual SIM

Dual SIM functionality is achieved by using together SIM card and embedded SIM. When the main SIM fails to connect, FMB1 will still stay online. Moreover, Dual SIM significantly reduces roaming costs, when using first SIM for Home network and second one for Roaming.

Bluetooth

Bluetooth

Integrated Bluetooth enables wireless headset and various other Bluetooth devices connectivity. Make phone calls to your employee via Bluetooth headset. No unauthorized calls anymore! Be sure that your employee is always safe and uses hands free headset instead of phone!

Various vehicle CAN data

Various vehicle CAN data

With additional Max GPS Vehicle CAN adapters you will be able to acquire CAN data from any kind of transport such as light vehicles, trucks, buses, agriculture transport, and special transport. Supported vehicles list contains more than 1800 models.

RS232/RS485

RS232/RS485

RS232/RS485 functionality enables connection of third party devices like: multiple LLS sensors, GARMIN personal navigation device, RFID readers or some other RS232/RS485 devices.

MDF-125 schematic esim

Product Features

TECHNOLOGY

  • GNSS : Global positiong system/Global Navigation Satellite System.
  • GPRS : General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS : Short Message Service (SMS) is a text messaging service component.
  • Bluetooth : Bluetooth is a wireless technology standard for exchanging data over short distances.

HARDWARE

  • Internal GSM antenna : An antenna used for GSM connectivity. Integrated into MDF device PCB. Does not have external connector.
  • External GNSS antenna : An antenna used for GPS connectivity. Connected to MDF device via external connector.
  • RS232 - 1 : RS-232 is a standard for serial communication transmission of data
  • RS485 - 1 : RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems
  • DIN - digital input - 1 : Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input - 1: An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT - 1 : Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • 1-Wire® - 1 : 1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.
  • Accelerometer : Accelerometer allows the device to indicate if vehicle is moving or not, as well as measure acceleration.
  • Battery - 170mAh Li-ion 3,7V : Allows device to work without external power source.
  • IP41 : Protected from tools and small wires, condensation.
  • Micro SD : Micro SD card slot for records storing when there is no GPRS connectivity.
  • 10 - 30V : External voltage range.
  • Overvoltage protection : Protects device from voltage jumps till 90V.
  • eSIM : Embedded SIM is a chip provided by GSM operator, which can be soldered on device PCB instead of using standard SIM card.
  • Dual-sim (1x SIM card; 1x eSIM) Dual-SIM functionality is achieved with 1 regular SIM card and one SIM chip.
  • USB 2.0 Interface : Device accessible and configurable via USB.

FIRMWARE

  • NITZ time synch.: Network Identity and Time Zone (NITZ) is a mechanism for provisioning local time and date, time zone and DST offset, as well as network provider identity information, to mobile devices via a wireless network.
  • Configuration over Bluetooth : Configuration over Bluetooth gives ability to configure the device remotely by using Bluetooth connection.
  • Bluetooth sensors support : Bluetooth sensors are responsible to transmit the collected data remotely to device.
  • LV-CAN support : LV-CAN200 is used to listen data from light vehicles. With this adapter MDF device is able to collect and send such data.
  • ALL-CAN support : ALL-CAN300 is used to listen data from any type of transport: light vehicles, Trucks, busses, agriculture and other special transport. With this adapter MDF device is able to collect and send such data.
  • Ignition detection : A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence : A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep : Working modes which let MDF deviceto reduce power consumption and save vehicle battery.
    - In sleep mode, MDF device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, MDF devicesets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection: This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA : Firmware over the air solution. The software is used to send firmware/configuration to MDF devicevia GPRS network.
  • Remote Log : This type of MDF data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • Garmin : Garmin provides a Fleet Management Interface Tool Kit, which connected to MDF device via RS232 interface enables the driver to have a in their vehicle for real-time navigation, messaging, and job dispatch capabilities to help them be more efficient.
  • GPRS commands : It is possible to send commands to MDF deviceusing GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • RFID RS232®: Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to MDF device via RS232 interface.
  • RFID 1-Wire®: Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to MDF device via 1-wire interface.
  • iButton 1-Wire®: iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with MDF devices
  • Temp. 1-Wire®: A temperature sensor which can be connected to MDF device and provide information via 1-wire data protocol.
  • Immobilizer: With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. MDF device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).
  • Eco driving : This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
    MDF deviceDigital Output 1 is controlled by scenario for user needs, buzzer or LED for example.
  • Green driving : Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Fuel monitoring LLS : Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.
  • Jamming detection: Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch.: Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • Transparent mode (RS232): The RS232 is a standard used for a serial communication between devices. While using RS232 connection various type of data like fuel parameters or messages can be transmitted.
  • SMS event : SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection: The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Crash detection : Crash detection functionality is generating the record when device detects car accident using the internal sensors (Accelerometer).
  • Odometer : Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection : Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Towing detection : Towing detection feature helps to inform the User about car deporting. The quick event will be sent to server while towing is detected.
  • Integrated scenarios : The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS : The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking : Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing : Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.
  • Voice call : The voice call functionality gives an ability to make a directly phone call with device.

Technical Details

GSM/GPRS features:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS Multi-Slot Class 12 (up to 240 kbps)
  • GPRS Mobile Station Class B
  • SMS (text/data)
  • Dual-SIM (1 x SIM card, 1 x eSIM)

Bluetooth:

  • Bluetooth specification V3.0
  • Bluetooth transceiver fully compliant with Bluetooth specification V3.0 for external peripherals:
    • Voice calls over Bluetooth
    • Configuration via Bluetooth
    • OBDII Bluetooth dongle

GNSS:

  • Tracking: 33/ 99 acquisition channels
  • -165 dBM sensitivity
  • Hot start < 1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
  • Accuracy < 3m

Interface:

  • 1 Digital Input
  • 1 Analog Input (10V or 30V range)
  • 1 Digital Open-collector Output (connecting external relays, LED, buzzers etc.)
  • 1-Wire® (iButton® , RFID, temperature sensors)
  • RS232
  • RS485
  • MicroSD
  • Motion sensor
  • Built in accelerometer
  • Power supply (+10...+30) V DC
  • Internal high gain GSM antenna
  • External GNSS antenna (SMAconnector)
  • Dimensions: L(65mm) x W(56,6mm) x H(18,9mm)
  • 2 Status LEDs
  • Micro USB Port
  • Integrated LiPo back-up battery

For product enquiry and more details

CONTACT US

we will try to contact you as soon as possible