LOGIN

MDF-6320

Vehicle Tracking Device

MDF-6320

MDF-6320

MDF-6320

3G, RS232/RS485, CAN J1708 and J1939, Heavy transport tracking device on 3G networks

MDF-6320 features

Product Details

Product Overview

Dual SIM

Dual SIM

Double GSM network reliability with Dual SIM! Even if your main SIM card fails to connect, MDF-6320 will stay online. Moreover, Dual SIM significantly reduces roaming costs, when using first SIM card for Home, second for Roaming data networks.

Micro SD card

Micro SD card

Don't lose any records with micro SD card up to 32 GB! MDF-630 will store all data in micro SD card when driving in areas where 3G/GSM is not available.

Integrated tachograph

Integrated tachograph solution

Integrated tachograph solution enables remote tachograph file (DDD, V1B, C1B or TGD format) download and live tachograph info acquisition without any additional adapter. Easier than ever connection - less integration time.

RS232/RS485

RS232/RS485

RS232/RS485 functionality enables connection of third party devices like: multiple LLS sensors, GARMIN personal navigation device, RFID readers or some other RS232/RS485 devices.

GNSS antenna detection

gnss

GNSS antenna disconnection detection will monitor the state of GNSS antenna. If any person cuts or disconnects the antenna, You will be immediately informed about such action.

MVC300 - online photos

MVC300 - online photos

Online photo solution allows to receive photo to server from your fleet management devices. MDF-6320 device 3G feature allows to receive photo in less than 1 minute after event.

J1708 CAN support

can

Read fuel data from heavy duty vehicles, from which fuel data reading was not possible before. J1708 CAN protocol ensures fuel data reading from Volvo and Renault heavy duty vehicles.

MDF-6320-scheme

Product Features

TECHNOLOGY

  • 3G : 3G is the third generation of wireless mobile telecommunications technology.
  • GNSS : Global positiong system/Global Navigation Satellite System.
  • GPRS : General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS : Short Message Service (SMS) is a text messaging service component.

HARDWARE

  • External GSM antenna : An antenna used for GSM connectivity. Connected to MDF device via external connector.
  • External GNSS antenna : An antenna used for GPS connectivity. Connected to MDF device via external connector.
  • CAN J1939 : SAE J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components
  • CAN J1708 : SAE J1708 is a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle
  • RS232 - 2 : RS-232 is a standard for serial communication transmission of data
  • RS485 - 1 : RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems
  • DIN - digital input - 4 : Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input - 3: An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT - 4 : Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • 1-Wire® - 1: 1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.
  • Accelerometer : Accelerometer allows the device to indicate if vehicle is moving or not, as well as measure acceleration.
  • Battery - 550mAh Ni-MH 8,4V : Allows device to work without external power source.
  • IP41 : Protected from tools and small wires, condensation.
  • 1MB memory : Internal memory for records storing when there is no GPRS connectivity.
  • Micro SD : Micro SD card slot for records storing when there is no GPRS connectivity.
  • 10 - 30V : External voltage range.
  • K-Line : Allows to get vehicle data from tachograph
  • Overvoltage protection : Protects device from voltage jumps till 90V.
  • 2x SIM Card : Allows to put 2 SIM cards (can be from different operators) for internet connection
  • USB 2.0 Interface : Device accessible and configurable via USB.

FIRMWARE

  • TachoWeb synch. : TachoWeb is an online platform which allows the User to download the DDD files. The special synchronization process can be used to adopt devices to the existing system.
  • iButton Notification : iButton Notification informs driver, that his iButton or 1-wire RFID card was scanned and stored.
  • LV-CAN support : LV-CAN200 is used to listen data from light vehicles. With this adapter MDF device is able to collect and send such data.
  • ALL-CAN support : ALL-CAN300 is used to listen data from any type of transport: light vehicles, Trucks, busses, agriculture and other special transport. With this adapter MDF device is able to collect and send such data.
  • Ignition detection : A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence : A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep : Working modes which let MDF deviceto reduce power consumption and save vehicle battery.
    - In sleep mode, MDF device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, MDF devicesets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection: This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA : Firmware over the air solution. The software is used to send firmware/configuration to MDF devicevia GPRS network.
  • Remote Log : This type of MDF data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • Garmin : Garmin provides a Fleet Management Interface Tool Kit, which connected to MDF device via RS232 interface enables the driver to have a in their vehicle for real-time navigation, messaging, and job dispatch capabilities to help them be more efficient.
  • GPRS commands : It is possible to send commands to MDF deviceusing GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • RFID RS232 : Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to MDF device via RS232 interface.
  • RFID 1-Wire® : Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to MDF device via 1-wire interface.
  • iButton 1-Wire® : iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with MDF devices
  • Temp. 1-Wire® : A temperature sensor which can be connected to MDF device and provide information via 1-wire data protocol.
  • Immobilizer : With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. MDF device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).
  • Eco driving : This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
  • Green driving : Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Fuel monitoring LLS : Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.
  • Fuel monitoring CAN MDF : The MDF CAN line gives ability to read the vehicle fuel level parameters. This functionality works with J1939 or J1708 communication standards.
  • Fuel counter : Helps to monitor the fuel flow in the vehicle and transmit the dedicated data to the server.
  • DDD download and Tacho online data : Tachograph data download helps User to gather tachograph information remotely. The tachograph data is directly transmitted to the fleet management device via k-line connection
  • Jamming detection: Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch.: Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • GNSS unplug detection : The GNSS unplug detection gives an ability to notify the User about GNSS antenna disassembly.
  • Transparent mode (RS232) : The RS232 is a standard used for a serial communication between devices. While using RS232 connection various type of data like fuel parameters or messages can be transmitted.
  • SMS event : SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection: The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Odometer : Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection : Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Profiles : Profiles configuration system gives an ability to configure the device with different behaviors. For example the device can change the profiles during the different operator code, engine working state or etc.
  • Integrated scenarios : The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS : The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking : Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing : Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Technical Details

GSM/GPRS/3G features:

  • UMTS/HSPA+, GSM/GPRS/EDGE module
  • UMTS/HSPA+ bands 800/850, 900, 1700, 1900, 2100 MHz
  • GSM/GPRS/EDGE bands 850, 900, 1800, 1900 MHz
  • HSPA+ data up to 21.0 Mbps downlink
  • HSPA+ data up to 5.76 Mbps uplink
  • HSPA+ data up to 7.2 Mbps downlink
  • HSPA+ data up to 5.76 Mbps uplink
  • UMTS uplink / downlink up to 384 Kbps
  • EDGE uplink up to 236.8 Kbps, downlink up to 296 Kbps
  • GPRS and EDGE class 33
  • SMS (text, data)

GNSS:

  • NMEA, GGA, GGL, GSA, GSV, RMC, VTG protocol compatible
  • 32 channel GNSS receiver
  • -162 dBm tracking Sensitivity

Interface:

  • Integrated KLINE
  • Dual CAN J1939
  • J1708 CAN
  • RS485 and 2x RS232 support
  • 4 Digital Inputs for object status monitoring
  • 4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
  • 3 Analog Inputs
  • 1-wire interface
  • Ni-Mh 550 mAh internal battery
  • MicroSD card
  • 2 status LED
  • Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)
  • Configuration and firmware update (via FOTA and USB cable)
  • External GSM antenna for higher sensitivity
  • External GNSS antenna for higher sensitivity

For product enquiry and more details

CONTACT US

we will try to contact you as soon as possible

Quick Links

Services

Get In Touch

  • PO Box. 11394, Jawad Center
  • King Fahd Road, Al Nuzhah
  • Jeddah-21453, Saudi Arabia
  • Tel: +966 92 001 5111
  • Email:

© 2022-23 - Max GPS Track. All Rights Reserved